Display settings - display backlight setting
Failure history - contains a list of errors according to individual tractor kn
ots
Performance monitor - enables monitoring of the work area (only if the tractor is equipped with electro-
hydraulics)
Calibration - allows adjustment of the display of the rear PTO speed, calibration of the ground speed, reset
of the service interval
Language - allows to set the language of the menu
Display - indicator of service inspection intervals
P18N070
The warning regarding an approaching maintenance date (service interval) is displayed if there are less than
25 operating hours remaining to the planned maintenance.
The maintenance symbol (1) is shown on the display of the instrument panel.
When the key in the switch box is moved from the position 0 to the position I, the main screen appears on
the display and after several seconds the warning regarding an approaching maintenance (B) with the
number of operating hours of the tractor (2) remaining to the maintenance date are displayed on the display.
Exceeding the service interval
Display - service menu
Entering the service menu
:
Enter the service menu by longer pressing of the button
(B) (ENTER).
Use the buttons (C) and (D) to select the items. The
selected item is marked with a frame.
Exiting the service menu:
Press the button (A) to return
from the service menu to the
main screen.
Service menu
The service menu contains the following items:
P18N049
In case of exceeding the service interval, the maintenance
alert (1) with the number of operating hours 0 is displayed
on the display when the key in the switch box is moved
from the position 0 to the position I.
P18N071
To Next Page
Loading...
Need help?
General