Drive awa
PCLPN039
1. Depress the clutch pedal.
2. Shift the main shifting lever to neutral position.
3. Start the engine.
4. Set the engine speed from 800 to 850 r.p.m.
5. Select road or reduced gears.
6. Shift the reversing lever to the tractor's travel direction (to the front or reversing).
7. Engage applicable gear for tractor's start
8. Increase engine revolutions slightly.
9. Prepare manual brake for unbraking.
10. Release the clutch pedal only to the point of travel engagement and with simultaneous increase of
engine revolutions continue in smooth release of clutch pedal.
11. Unbrake manual brake completely.
12. Drive away smoothly and slowly.
A very fast drive away may cause overload of driving set, increased fuel consumption,
excessive tires wear and load damage. Drive away with 1
st
gear to be used only when driving with
a heavy trailer up the slope and in difficult terrain.
To Next Page
Loading...
Need help?
General