Ballast weights are necessary to additionally load the tractor axles and to ensure manoeuvrability and
stability of the tractor.
Weights in front of the bonnet mask
Weights of the front three-point hitch
Weights of rear wheels
Valve for filling tyre tubes with liquid
Combination
of weights
(pcs)
Weights
(kg)
4+1 4x50 + 66 266
8+1 8x50 + 66 466
12+1 12x50 + 66 666
P11NE551
Combination of
weights (pcs)
Weights
(kg)
10 10x28 280
P11NE552a
- Mounting of weights for rear wheel treads 1,350 to
1,500 mm
B - Mounting of weights for rear wheel treads 1,575 to
1,800 mm
Combination of
weights (pcs)
Weights
(kg)
2+2 2x16 + 2x30 90
2+4 2x16 + 4x30 150
2+8 2x16 + 8x30 270
E553
All inner tubes of rear wheels are provided with valves that
allow their filling with a fluid if an extension is used.
Tubeless tyres cannot be filled with any fluid!
Only radial tubeless tyres can be filled with water for
urpose of additional loadin
. Filling of tubes of the
front wheel tyres and rear double wheels with a fluid
is not permitted!
To Next Page
Loading...
Need help?
General