Inhibition of regeneration of the diesel particulate filte
- EAT REGENERATION INHIBI
The function of inhibition of regeneration of the diesel particulate filter (EAT REGENERATION INHIBIT) is
used to block the process of DPF regeneration for safety reasons only during operation of the tractor in
a flammable environment (e.g. storage of hay or straw).
S15N022
EAT REGENERATION INHIBIT is set in the menu for setting the engine ( b ). After entering the tab, choose
the corresponding item using the buttons ( B ) and ( C ). Activate the mode of inhibition of the filter
regeneration ( b ) by long pressing the button ( A ). Successful activation is indicated by the activated symbol
(c) in the upper right corner of the instrument panel display. In case that the regeneration must be started,
a maintenance symbol is activated simultaneously with the symbol of regeneration inhibition.
Long-term inhibition of regeneration (in the order of several hours) causes that the DPF filter
becomes full and subsequently the engine power is decreased!
The function of inhibition of DPF regeneration should be active for safety reasons only. After
the period when the regeneration must be inhibited has expired, immediately set the mode of DPH
automatic re
eneration
SYSTEM OF ADDITIONAL TREATMENT OF EXHAUST GASES
To Next Page
Loading...
Need help?
General