Fuels, coolants and lubricants used - amounts
* - During work on a slope the filling should be increased by another 7 litres of oil. This also holds good for
aggregation with machines connected to the outer hydraulic circuit.
The manufacturer does not take responsibility for any damages caused by the usage of
service fillings that do not comply with requirements stated in this service manual.
ZETOR service fillings
To maintain best operational characteristics of your tractor, original operational Zetor fillings are
recommended to be used.
Motor oils
Engine oil Zetor 15W40 L-SAPS
Oil in the gearbox and final drivehousing
Oil for gearing mechanisms of tractors ZETOR EXTRA 10W30 STOU
Oil in the rear axle gantries
Oil for gearing mechanisms of tractors ZETOR EXTRA 10W30 STOU
Oil for gearing mechanisms of tractors ZETOR 80W
Oil for the front driving axle
Oil for the front axle ZETOR LS 80W
Oil for the hydrostatic steering of the tractors
Hydraulic oil ZETOR HM 32
Specification of oils for Zetor engines equipped by diesel particle filter
Specification of the oil for the gearbox housing and the final drive housing
Designation
Quantity in
litres
Brake liquid 0.5
Cooling liquid 21
Engine oil 10
Hydrostatic steering oil 2.5
Oil of the front driving axle box 5.5
Oil of the planetary reducers of the front driving axle 2x0.6
Oil of the planetary reducers of the front driving axle equipped with brakes 2x1.7
Gantry oil 2x1.9
Gearbox and final drive housing oil 70 *
Front PTO gearbox oil 2.7
Urea 30
Fuel 180
Classification ACEA Viscosity class SAE Performance class API
E9/E7 15W-40 API CJ-4/SM
Viscosity Class SAE Performance Class API
10W - 30 GL-4
To Next Page
Loading...
Need help?
General