ABB IRB 460 User Manual

7 Reference information
7.6. Standard toolkit
2373HAC026660-001 Revision: C
© Copyright 2006-2008 ABB. All rights reserved.
7.6. Standard toolkit
General
All service (repairs, maintenance and installation) procedures contain lists of tools required
to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools that are
considered standard are gathered in the Standard toolkit and defined in the table below.
This way, the tools required are the sum of the Standard Toolkit and any tools listed in the
instruction.
Contents, standard toolkit
Qty Tool
1 Ring-open-end spanner 8-19 mm
1 Socket head cap 2.5-17 mm
1 Torx socket no: 20-60
1 Torque wrench 10-100 Nm
1 Small screwdriver
1 Plastic mallet
1 Ratchet head for torque wrench 1/2
1 Socket head cap no: 5, socket 1/2" bit L 20 mm
1 Socket head cap no: 6, socket 1/2" bit L 20 mm
1 Socket head cap no: 8, socket 1/2" bit L 20 mm
1 Small cutting plier

ABB IRB 460 Specifications

General

Brand	ABB
Model	IRB 460
Category	Robotics
Language	English