3.3.3 Inspecting, oil level gearbox axis 6
Location of gearbox
The axis 6 gearbox is located in the tilthouse unit as shown in this figure.
xx0500002484
Gearbox, axis 6A
Oil plug, fillingB
Oil plug, drainingC
Required equipment
NoteArt. no.Equipment
Optimol Optigear BM 1003HAC0860-1Lubricating oil
Content is defined in section
Standard tools on page 347.
-Standard toolkit
These procedures include refer-
ences to the tools required.
Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Continues on next page
Product manual - IRB 660 101
3HAC025755-001 Revision: W
© Copyright 2006-2020 ABB. All rights reserved.
3 Maintenance
3.3.3 Inspecting, oil level gearbox axis 6