7.3.3 Importing SCL files to PCM600
The IED engineering tool must be able to receive a SCD file or an ICD file as an
import to receive the engineered communication extensions, for example, for the
different IEDs.
7.3.3.1 Importing SCD files
1. Select the station in the Plant Structure view.
2. Right-click the station and select Import.
3. From the open standard Windows menu, select the file to be imported and start
the reading.
The SCL Import Options dialog box opens, querying how the file should be
handled during the import.
IEC09000631 V1 EN
Figure 67: IEC 61850: importing a SCD file
4. In the SCL Import Options dialog box, select how to handle the file during the
import.
• Click Don't import IEDs of unknown type to protect the existing IEDs in
case the SCD file does not match the original configuration in PCM600.
• Click Replace unknown if it is known that the file includes additional
IEDs that are needed. The IED of type “Generic IEC 61850 IED” is used to
integrate these kinds of IEDs into the plant structure, for example.
• Click Ignore PCM Object Type to update the IED object(s) in PCM600
from the IED type(s) in the SCD file, whether or not the IED type(s) in the
SCD file matches the IED object(s) in PCM600.
• Click Ignore Substation Section to not import the SSD file part of the
SCD file.
5. Click Import when the file definition has been completed.
1MRS240044-IB A Section 7
IEC 61850 communication engineering
REF615R 107
Engineering Manual
To Next Page
Loading...
Need help?
General
