Setup Pages
46
MVP-9000i 9" Modero® ViewPoint® Touch Panel with Intercom
Audio Page
The Audio page allows adjustment of volume levels and panel sounds settings (FIG. 52).
Features on this page include:
FIG. 52 Audio pages
Audio Page
Back: Saves all changes and returns to the previous page.
WiFi/Wired icon: The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna) or Wired (image of
three networked computers).
Connection Status
icon:
The icon in the upper-right corner of each Setup page provides a constant visual
indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
Button Sounds: • Activating the Hit On button plays a default sound when you touch an active
button. Touch the field a second time to switch the button to Hit Off, which
disables the sound.
• Activating Miss On button plays a default sound when you touch a non-active
button or any area outside of the active button. Touch the field a second time to
switch the button to Miss Off, which disables the sound.
•The Test button plays a test WAV/MP3 file over the panel’s internal speakers.
Intercom
Mic Level: Adjusts the volume level on the intercom’s microphone:
• Use the Up/Down buttons to adjust the microphone level (range = 0 - 100%).
Press the Mute On button to mute the microphone and press it again (switching
the button to Mute Off) to enable it.
Volume: Adjusts the volume level on the touch panel’s speaker:
• Use the Up/Down buttons to adjust the speaker level (range = 0 - 100%). Press
the Mute On button to mute the speaker and press it again (switching the button
to Mute Off) to enable it.
Master Volume: This section allows you to alter the current master volume level:
• Use the Up/Down buttons to adjust the volume level in one-percent increments
(range = 0 - 100%).
• The Master Volume readout indicates the current volume level. Press the Up/
Down buttons to adjust the volume level in one-percent increments (range = 0 -
100%).
• The Mute On button toggles the Mute feature. Press it again to switch it to Mute
Off.
To Next Page
Loading...
Need help?
General
