Could not connect. Check the encryption key settings.
The network key (encryption key) of the wireless LAN router (access point) is not conî ´gured correctly, preventing
connection.
Reset the Network Key.
Check the network key of the wireless LAN router, and conî ´gure the settings correctly on the machine.
Connecting to a Wireless LAN(P. 57)
Could not connect. Max no. of devices that can connect to access point
r
eached
The maximum number of devices that can be connected to the wireless LAN router (access point) has been reached,
preventing connection.
Reduce the Number of Devices (Clients) Connected to the Wireless LAN Router.
For the maximum number of connections, see the manual of the wireless LAN router or contact the
manufacturer.
Could not detect any connections from wireless devices.
An error occurred, preventing the machine from detecting mobile devices.
Did You Connect Within the Fixed Time?
Connect the mobile device to the machine within î ´ve minutes of the SSID and network key being displayed.
Could not perform cleaning.
Cleaning could not be performed due to jammed paper, loading of incorrect paper, or another problem.
Load Correct Paper in the Drawer.
Follow the instructions on the control panel during cleaning, and load usable paper. Loading Paper in the
Dr
awer(P. 139)
Is Paper Jammed?
If so, remove any jammed paper.
Paper Jams(P. 543)
Could not perform IEEE 802.1X authentication. Cannot analyze the
authentication server certiî ´cate.
Check the certiî ´cate of the authentication server, and change the setting, as needed.
Check the Certiî ´cate of the RADIUS Server, and Change the Setting, as Needed.
Setting IEEE 802.1X(P. 356)
Could not perform IEEE 802.1X authentication. Change the authentication
password.
The password has expired.
Set a New Password.
Setting IEEE 802.1X(P. 356)
Troubleshooting
627
To Next Page
Loading...
Need help?
General
