Overview and Setup
EN-9
■ Touch Ring Operation and Notation
■ Touch Button Operation and Notation
■ F Buttons (F1 to F4) Operation and Notation
Touch Operation and Notation Used in this Guide
This operation is shown like this
Touch and immediately release the top, bottom, left or
right edge of the touch ring
Touch top, bottom, left or right on the
touch ring.
It is also written as follows:
• Use the touch ring to change the value.
• Use the touch ring to select “___”.
Trace the circumference of the touch ring with your finger
in a counterclockwise or clockwise direction
(Acts as a controller to change settings.)
Trace on the touch ring.
It is also written as follows:
• Use the touch ring to change the value.
• Use the touch ring to select “___”.
This operation is shown like this
Touch and immediately release the EXIT button Touch the EXIT button.
Hold the EXIT button down for about 2 seconds and
then release it
Touch and hold the EXIT button.
This operation is shown like this
Touch and immediately release the F1 button Touch the F1 button (DEMO).
It is also written as follows:
• Touch the F button to which “DEMO”
is assigned.
F Button Menu on the display: