EN-65
The mixer allows you to individually adjust the volume, stereo pan, and effects for each part (Upper 1/
Upper 2/Lower) and audio input from the MIC IN jack.
1.
Select the “04 Listening” of the F button set. See “To change the F Button Set”
(page EN-32).
2.
Touch the F4 button (MIXER).
The “MIXER” screen appears. This screen contains four parameter categories.
VOLUME: Adjust volume
PAN: Adjust stereo pan (pan)
HALL/REV.: Adjust the depth of the Hall Simulator/Reverb effect
CHORUS: Adjust the depth of the chorus effect
3.
Use the touch ring to select the parameter category you want to adjust then
touch the ENTER button.
• For example, if you select “VOLUME” and touch the ENTER button, the following screen will
appear.
4.
Touch the top or bottom of the touch ring to select the item whose value you
want to change.
5.
Change the value of the selected item.
• Trace the touch ring to change the value.
• For more information on items and values, see “List of Mixer Setting Items” (page EN-66).
6.
When done, touch the EXIT button to return to the “MIXER” screen.
7.
Repeat steps 3 to 6 as necessary.
Using the Mixer
Adjusting the Volume Level, Stereo Pan and Effects for
Each Part
To Next Page
Loading...
Need help?
General
