EN-130
Use the transpose feature to raise or lower the pitch of all notes in semitone steps. This allows you to
transpose the key of your playing to another key.
1.
Select the “12 Control” of the F Button Set. See “To change the F Button Set”
(page EN-32).
2.
Touch the F2 button (TRANS).
The “TRANSPOSE” screen appears.
3.
Trace the touch ring to change the setting value.
• It can be changed to a value between –12 and +12 semitones.
Use the tuning feature when you need to adjust the overall pitch of the Digital Piano.
• The tuning feature specifies the frequency of the A4 note. You can set a frequency within the range
of 415.5 to 465.9 Hz. The initial default setting is 440.0 Hz.
• You can change the frequency in 0.1 Hz steps.
1.
Touch the FUNCTION button to display the FUNCTION Menu.
2.
Touch the top or bottom of the touch ring to select “SYSTEM”, then touch the
ENTER button.
The “SYSTEM” screen appears.
• Confirm that the cursor ( ) is on “Master Tuning”.
3.
Change the value of the “Master Tuning” setting.
• Trace the touch ring to change the desired setting value.
Changing the Pitch
Changing the Pitch in Semitone Steps (Transpose)
Changing the Transpose Setting
Fine Tuning a Pitch (Master Tuning)
To Next Page
Loading...
Need help?
General
