Overview and Setup
EN-19
To adjust the contrast of the display, use “SYSTEM” > “LCD Contrast” in the FUNCTION menu (page
EN-33).
Control the master volume of the Digital Piano using the volume knob.
• The mixer function (page EN-65) allows you to individually adjust the volume of the keyboard, song
playback volume, and input volume from the MIC IN jack.
Using headphones cuts off output from the built-in speakers, which means you can practice playing
even late at night without disturbing others.
• Be sure to turn down the volume level before connecting headphones to the PHONES jack.
• Do not listen to very high volume output over headphones for long periods. Doing so creates
the risk of hearing damage.
• When connecting headphones to the stereo mini phone jack, be sure to use a stereo mini
phone plug (Mini TRS phone). Use of other types of plugs is not supported.
• If you are using headphones that require an adaptor plug, make sure you do not leave the
adaptor plugged in when you unplug the headphones. If you do, nothing will sound from the
speakers when you play.
• Use commercially available headphones that meet the following conditions.
− Maximum input: 150mW or greater
− Impedance: 32Ω or greater
• Use of the optional CP-16 headphones is not recommended.
Adjusting Display Contrast
Adjusting the Volume
Using Commercially Available Headphones
PHONES jacks
(Top: stereo mini phone jack (Mini TRS phone)/
Bottom: stereo standard phone jack (TRS phone))
To Next Page
Loading...
Need help?
General
