Operations Common to All Modes
EN-27
The dots ( ) shown on the display of the Digital Piano indicate items that can be used with the touch
ring or ENTER button.
Select the item to adjust and use the touch ring to change its value. Try out the following operations.
1.
Turn on the Digital Piano.
The top screen appears.
2.
Touch the top or bottom of the touch ring.
Each touch of the touch ring moves the cursor ( ) between the dots.
Basic Operation for Contents of the Display
Selecting Operation Items
− When the cursor is on a dot ( ), you can change the value of that item by tracing along the
touch ring.
− When the cursor is on a dot ( ), touch the ENTER button to display the list screen
(category list screen or value list screen) corresponding to that item*.
− Move the cursor ( ) by touching the top or bottom of the touch ring.
* Operations after touching the ENTER button are described in a later
section.
To Next Page
Loading...
Need help?
General
