Cisco 7609 User Manual

18-19
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
78-14064-04
Chapter 18 Configuring IP Multicast Layer 3 Switching
Configuring IP Multicast Layer 3 Switching
Clearing IP Multicast Layer 3 Switching Statistics
To clear IP multicast Layer 3 switching statistics, perform this task:
This example shows how to clear IP multicast Layer 3 switching statistics:
Router# clear mls ip multicast statistics
The show mls multicast statistics command displays a variety of information about the multicast flows
being handled by the PFC. You can display entries based on any combination of the participating MSFC,
the VLAN, the multicast group address, or the multicast traffic source. For an example of the show mls
ip multicast statistics command, see the “Displaying IP Multicast Layer 3 Switching Statistics” section
on page 18-17.
[no] debug mls ip multicast group group_id
group_mask
Turns on debugging for a subset of flows.
[no] debug mls ip multicast messages
Displays IP multicast Layer 3 switching messages from and to
hardware switching engine.
[no] debug mls ip multicast all
Turns on all IP multicast Layer 3 switching messages.
[no] debug mdss errors
Turns on MDSS
1
error messages.
[no] debug mdss events
Turns on MDSS-related events.
[no] debug mdss all
Turns on all MDSS messages.
1. MDSS = Multicast Distributed Switching Services
Table 18-2 IP Multicast Layer 3 Switching Debug Commands (continued)
Command Description
Command Purpose
Router# clear mls ip multicast statistics
Clears IP multicast Layer 3 switching statistics.

Cisco 7609 Specifications

General

Brand	Cisco
Model	7609
Category	Network Router
Language	English