Cisco 7609 User Manual

33-17
Cisco 7600 Series Router Cisco IOS Software Configuration Guide—12.1E
78-14064-04
Chapter 33 Configuring NDE
Configuring NDE
Clearing an NDE Flow Filter
To clear the NDE flow filter and reset the filter to the default (all flows exported), perform this task:
This example shows how to clear the NDE flow filter so that all flows are exported:
Router# clear mls nde flow all
Router#
To display the status of the NDE flow filters, use the show mls nde command described in the
“Displaying the NDE Configuration” section on page 33-17.
Displaying the NDE Configuration
To display the NDE configuration, perform this task:
This example shows how to display the NDE configuration:
Router# show mls nde
Netflow Data Export enabled
Netflow Data Export configured for port 0 on Host 0.0.0.0
Source address: 172.20.52.3, port: 8
Version: 0
Include Filter is:
destination: ip address 0.0.0.0, mask 0.0.0.0, port 35
source: ip address 0.0.0.0, mask 0.0.0.0, port 0
Exclude Filter is:
destination: ip address 2.2.2.2, mask 255.255.255.0, port 23
source: ip address 0.0.0.0, mask 0.0.0.0, port 0
Total Netflow Data Export Packets are:
0 packets, 0 no packets, 0 records
Router#
Command Purpose
Router# clear mls nde flow {all | exclude | include}
Clears the NDE flow filter.
Command Purpose
Router# show mls nde
Displays the NDE configuration.

Cisco 7609 Specifications

General

Brand	Cisco
Model	7609
Category	Network Router
Language	English