Cisco ESW 500 User Manual

Configuring Device Security
Defining Access Control
ESW 500 Series Switches Administration Guide 166
5
STEP 3 Define the relevant fields,
STEP 4 Click Apply. The IP Based ACL is modified, and the device is updated.
Adding an IP Based Rule
STEP 1 Click Security > Access Control Lists (ACL) > IP Based ACL. The IP Based ACL
Page
opens:
STEP 2 Select an ACL from the ACL Name drop-down list.
STEP 3 Click the Add Rule button. The Add IP Based Rule Page opens:
Add IP Based Rule Page
The
Add IP Based Rule Page contains the following fields:
• ACL Name — Displays the user-defined IP based ACLs.
• New Rule Priority — Indicates the rule priority, which determines which rule is
matched to a packet on a first-match basis.
• Protocol — Creates an ACE based on a specific protocol. For a list of available
protocols, see the Protocol field description in the
IP Based ACL Page above.

Cisco ESW 500 Specifications

General

Brand	Cisco
Model	ESW 500
Category	Switch
Language	English