Cisco ESW 500 User Manual

Configuring Quality of Service
Defining General Settings
ESW 500 Series Switches Administration Guide 301
12
• Restore Defaults — Restores the factory CoS default settings to the selected
port.
- Checked — Restores the factory QoS default settings to ports after
clicking the Apply button.
- Unchecked — Maintains the current QoS settings.
STEP 2 Define the relevant fields.
STEP 3 Click Apply. The QoS Mode is defined, and the device is updated.
Modifying Interface Priorities
STEP 1 Click Quality of Service > General > CoS. The CoS Page opens:
STEP 2 Click the Edit button. The Edit Interface Priority Page opens:
Edit Interface Priority Page
The
Edit Interface Priority Page contains the following fields:
• Interface — Indicates whether the interface is a port or EtherChannel.
• Set Default User Priority — Defines the default CoS value for incoming packets
for which a VLAN tag is not defined. The possible field values are 0-7. The
default CoS is 0.
STEP 3 Modify the Interface priority.
STEP 4 Click Apply. The Interface priority is set, and the device is updated.

Cisco ESW 500 Specifications

General

Brand	Cisco
Model	ESW 500
Category	Switch
Language	English