Managing Smart Ports
Configuring Smart Ports for Switches
ESW 500 Series Switches Administration Guide 71
3
STEP 7 Select which trunks are permitted in the VLAN using the Allow and Exclude
buttons.
STEP 8 Click Apply. The Access Point port settings are saved, and the device is updated.
STEP 9 Click OK. The Smart ports Setting page opens.
Configuring Smart Ports for Switches
The
Smart Ports Switch Settings Page
allows network administrators to manage
network settings between switches. To configure smart ports for switches:
STEP 1 Open the Switch Configuration Utility. The web application automatically opens
to the
System Dashboard Page
.
STEP 2 Click Smart Ports Wizard under Ports on the
System Dashboard Page
. The
Smart
Ports Setting Page
opens:
Smart Ports Setting Page
STEP 3 Select a port or range of ports.
To Next Page
Loading...
Need help?
General