Cisco ESW 500 User Manual

Configuring Device Security
Defining Access Methods
ESW 500 Series Switches Administration Guide 124
5
- HTTP — Assigns HTTP access to the rule. If selected, users accessing
the device using HTTP meeting access profile criteria are permitted or
denied access to the device.
- Secure HTTP (SSL) — Assigns HTTPS access to the rule. If selected,
users accessing the device using HTTPS meeting access profile criteria
are permitted or denied access to the device.
- Secure Telnet (SSH) — Assigns SSH access to the rule. If selected,
users accessing the device using Telnet meeting access profile criteria
are permitted or denied access to the device.
• Interface — Defines the interface on which the access profile is defined. The
possible field values are:
- Port — Specifies the port on which the access profile is defined.
- EtherChannel — Specifies the EtherChannel on which the access profile
is defined.
- VLAN — Specifies the VLAN on which the access profile is defined.
• Source IP Address — Defines the interface source IP address to which the
access profile applies. The Source IP Address field is valid for a subnetwork.
• Network Mask — Determines what subnet the source IP Address belongs to in
the network.
• Prefix Length — Defines the number of bits that comprise the source IP
address prefix, or the network mask of the source IP address.
• Action — Defines the action attached to the rule. The possible field values are:
- Permit — Permits access to the device.
- Deny — Denies access to the device. This is the default.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The profile rule is added, and the device is updated.
Modifying Profile Rules
STEP 1 Click Security > Access Method > Profile Rules. The Profile Rules Page opens:
STEP 2 Click the Edit button. The Edit Profile Rule Page opens:

Cisco ESW 500 Specifications

General

Brand	Cisco
Model	ESW 500
Category	Switch
Language	English