Configuring VLANs
Defining Protocol Groups
ESW 500 Series Switches Administration Guide 225
7
Defining Protocol Groups
The
Protocol Group Page
contains information which describes the protocol
names and the VLAN Ethernet type. Interfaces can be classified as a specific
protocol based interface.
STEP 1 Click VLAN & Port Settings > VLAN Management > Protocol Group. The
Protocol
Group
Page
opens:
Protocol Group Page
The
Protocol Group Page
contains the following fields:
• Frame Type — Displays the packet type.
• Protocol Value — Displays the User-defined protocol name.
• Group ID (Hex) — Defines the Protocol group ID to which the interface is
added. Range is 1-2147483647.
STEP 2 Click the Add Button. The
Add Protocol Group Page
opens:
To Next Page
Loading...
Need help?
General