Cisco ESW 500 User Manual

Viewing Statistics
Viewing Ethernet Statistics
ESW 500 Series Switches Administration Guide 392
17
- 30 Sec — Indicates that the GVRP statistics are refreshed every 30
seconds.
- 60 Sec — Indicates that the GVRP statistics are refreshed every 60
seconds.
- No Refresh — Indicates that the GVRP statistics are not refreshed.
The GVRP Received Transmitted Table contains the following fields:
• Join Empty — Displays the device GVRP Join Empty statistics.
• Empty — Displays the device GVRP Empty statistics.
• Leave Empty — Displays the device GVRP Leave Empty statistics.
• Join In — Displays the device GVRP Join In statistics.
• Leave In — Displays the device GVRP Leave in statistics.
• Leave All — Displays the device GVRP Leave all statistics.
The GVRP Error Statistics Table contains the following fields:
• Invalid Protocol ID — Displays the device GVRP Invalid Protocol ID statistics.
• Invalid Attribute Type — Displays the device GVRP Invalid Attribute ID
statistics.
• Invalid Attribute Value — Displays the device GVRP Invalid Attribute Value
statistics.
• Invalid Attribute Length — Displays the device GVRP Invalid Attribute Length
statistics.
• Invalid Event — Displays the device GVRP Invalid Events statistics.
Resetting GVRP Statistics Counters
STEP 1 Click Statistics > Ethernet > GVRP. The GVRP Page opens.
STEP 2 Click Clear Counters. The GVRP statistics counters are cleared.
Viewing EAP Statistics
The EAP Page contains information about EAP packets received on a specific
port.

Cisco ESW 500 Specifications

General

Brand	Cisco
Model	ESW 500
Category	Switch
Language	English