Cisco ESW 500 User Manual

Configuring Quality of Service
Defining Advanced QoS Mode
ESW 500 Series Switches Administration Guide 320
12
Add QoS Aggregate Policer Page
The
Add QoS Aggregate Policer Page contains the following fields.
• Aggregate Policer Name — Specifies the Aggregate Policer Name.
• Ingress Committed Information Rate (CIR) — Defines the CIR in Kbits per
second.
• Ingress Committed Burst Size (CbS) — Defines the CbS in bytes per second.
• Exceed Action — Action assigned to incoming packets exceeding the CIR.
Possible values are:
- Drop — Drops packets exceeding the defined CIR value.
- Remark DSCP — Remarks packet’s DSCP values exceeding the defined
CIR value.
- None — Forwards packets exceeding the defined CIR value.
STEP 3 Define the relevant fields.
STEP 4 Click Apply. The Aggregate policer is added, and the device is updated.
Modifying QoS Aggregate Policer
STEP 1 Click Quality of Service > Advanced Mode > Aggregate Policer. The Aggregate
Policer Page
opens:
STEP 2 Click the Edit Button. The Edit QoS Aggregate Policer Page opens:

Cisco ESW 500 Specifications

General

Brand	Cisco
Model	ESW 500
Category	Switch
Language	English