Cisco ESW 500 User Manual

Getting Started
Connecting to the Switch
ESW 500 Series Switches Administration Guide 7
1
STEP 3 If your PC is using a static IP address, make note of your current IP address
settings, and record them for future use.
STEP 4 Place the PC on the same subnet of the switch by configuring the PC with the
following parameters:
• Static IP address — 192.168.10.11
• Subnet mask — 255.255.255.0
• Default gateway — 192.168.10.2
NOTE Details on how to change the IP address on your PC are dependent upon the
type of architecture and operating system installed. Use your PC’s local Help
and Support functionality and search for “IP Addressing”.
STEP 5 Open a web browser. Cisco recommends Internet Explorer version 6 or higher, or
Firefox version 3. Accept any requests to install Active-X plugin.
Enter http://192.168.10.2 in the address bar and press Enter. The
Log In page
opens:

Cisco ESW 500 Specifications

General

Brand	Cisco
Model	ESW 500
Category	Switch
Language	English