Cisco ESW 500 User Manual

Configuring Device Security
Defining DHCP Snooping
ESW 500 Series Switches Administration Guide 183
5
Add DHCP Snooping Entry Page
The window displays the following fields:
• Type — Displays the IP address binding type. The possible field values are:
- Static — Indicates the IP address is static.
- Dynamic — Indicates the IP address is defined as a dynamic address in
the DHCP database
.
• VLAN ID — Displays the VLAN ID to which the IP address is attached in the
DHCP Snooping Database.
• IP Address — Indicates the IP address found during the query.
• Interface — Indicates the specific interface connected to the address found
during the query.
Lease Time — Displays the lease time.
STEP 5 Define the fields.
STEP 6 Click Apply. The bound address is added to the DHCP Snooping database and the
device is updated.
STEP 7 Click Delete to delete the data from the Query Results Table.
STEP 8 To remove dynamic addresses from the Query Results table, click Clear Dynamic.

Cisco ESW 500 Specifications

General

Brand	Cisco
Model	ESW 500
Category	Switch
Language	English