Cisco ESW 500 User Manual

Configuring VLANs
Defining GVRP Settings
ESW 500 Series Switches Administration Guide 222
7
STEP 1 Click VLAN & Port Settings > VLAN Management > GVRP Settings. The GVRP
Settings
Page opens:
GVRP Settings Page
The
GVRP Settings Page contains the following fields:
• GVRP Global Status — Indicates if GVRP is enabled on the device. The
possible field values are:
- Enable — Enables GVRP on the device.
- Disable — Disables GVRP on the device.
• Copy From Entry Number — Copies GVRP parameters from the specified
table entry.
• To Entry Number(s) — Assigns the copied GVRP parameters to the specified
table entry.
• Ports — Indicates that ports are described on the page.
• EtherChannels — Indicates that EtherChannels are described on the page.
• Interface — Interface described by the GVRP settings entry.

Cisco ESW 500 Specifications

General

Brand	Cisco
Model	ESW 500
Category	Switch
Language	English