CKD AX0180 User Manual

[SMB-66E]
－ 36 －
OPERATION
2
2.7.3 Execution program selection procedure
1) Press or until "3 NO." is displayed,
and press
３
.
2) Enter the program number to be started, and press
.
3) A message is displayed and the menu is displayed
again.
※
※※
※ If the program number is not registered to the
ABSODEX driver, the following message is
displayed.
Enter the registered number.
2.7.4 Alarm resetting procedure
1) Press or until "4 RESET" is displayed,
and press
４
.
2) Data about the current alarm is displayed. Check.
If there are two or more alarms,
press
or to scroll.
※
※※
※ If there is an alarm, you cannot execute
"START," "SINGLE" or "MDI."
The following message is displayed. Determine
the cause of the alarm and remove it.
For the alarm, refer to Section 5.1 "Alarms and
Contents."
3) Next, press to reset.
A message is displayed and the menu is displayed
again.
※
※※
※ To refrain from resetting, press
MODE
while alarm data is displayed.
You can return to the menu.
１ＳＴＡＲＴ ２ＳＴＯＰ
３ＮＯ． ４ＲＥＳＥＴ
★
If program number "1" is selected
Enter "1"
and press
ＮＯ．ＳＥＬＥＣＴ
ＰＲＧＭ ＮＯ． ［ １］
ＰＲＧＭ ＮＯ． ［ １］
ＳＥＬＥＣＴＥＤ
★
If program number "10" not registered is
selected
State waiting for data
entry
ＮＯ ＰＲＧＭ ＮＯ．
ＰＲＧＭ ＮＯ． ［ １０］
ＮＯ．ＳＥＬＥＣＴ
ＰＲＧＭ ＮＯ． ［ １０］
１ＳＴＡＲＴ ２ＳＴＯＰ
３ＮＯ． ４ＲＥＳＥＴ
Alarm number
Alarm description
ＡＬＡＲＭ ７
ＣＯＭ ＥＲＲＯＲ
ＡＬＡＲＭ ＧＥＮＥＲＡＴＥＤ
３ＮＯ． ４ＲＥＳＥＴ
＊ＲＥＳＥＴ＊
ＣＯＭ ＥＲＲＯＲ

CKD AX0180 Specifications

General

Brand	CKD
Model	AX0180
Category	Touch terminals
Language	English