Modules & Options
6 - 82 Trusted Platform Module
6
Enabling & Activating TPM
1. Restart the computer.
2. Enter the BIOS pressing F2 during the POST/startup.
3. Click to enter the Setup Utility and select the Security menu.
4. Click TPM Configuration and select Enable for Security Device Support.
5. You will then need to save the changes and restart the computer.
Clearing TPM
Information
You can click Clear
TPM, which will toggle
the setting between En-
abled/Disabled. If set
to Enabled this will
clear existing TPM in-
formation in order to re-
set the TPM.
Figure 6 - 70
Security - Trusted
Computing
To Next Page
Loading...
Need help?
General
