Dell V505 User Manual

Defaults Options
You can specify your operator panel default settings by selecting Defaults from the Setup menu.
Network Setup Options
You can configure your network setup options by selecting Network Setup from the Setup menu.
Device Setup Menu
From this menu: You can:
*Factory default setting/Current setting selected by user
Language Specify your language options.
Country Specify your country options.
Date/Time Enter your current date and time.
Host Fax Settings Specify if you want to allow the printer fax settings to be reconfigured from the Printer Setup
Utility software.
*Allow
Block
Button Beep Specify if you want to hear a beep when you press buttons on the operator panel.
*On
Off
Power Save Specify how much time you want to elapse before the printer switches to Power Save mode.
Now
After 10 Min
After 30 Min
*After 60 Min
After 120 Min
After 240 Min
Clear Settings
Timeout
Select how much time you want to elapse before the settings list is reset to the defaults.
*After 2 Min
Never
2-Sided Dry Time Specify the amount of duplex dry time before a document is automatically loaded back into the
duplex unit.
*Normal
Extended
Defaults Menu
From this menu: You can:
Photo Print Size Specify the size of your photo.
Set Defaults Specify which settings to use for your printer.
Use Current
Use Factory
Network Setup Menu
From this menu: You can:
Print Setup Page Print a list of wireless network settings.
Wi-Fi Protected Setup Specify which type of configuration to use for Wi-Fi protection.

Dell V505 Specifications

General

Brand	Dell
Model	V505
Category	All in One Printer
Language	English