NOTE: Do not load postcards, photos, small items, or thin media (such as magazine clippings) into the ADF.
Place these items on the scanner glass.
2. Adjust the paper guide on the ADF against the edges of the paper.
Loading Original Documents on the Scanner Glass
1. Open the top cover.
ADF Paper Capacity
Load up to Make sure:
25 sheets of letter size paper
The document is loaded text side up.
The paper guide rests against the edge of the paper.
25 sheets of legal size paper
The document is loaded text side up.
The paper guide rests against the edge of the paper.
25 sheets of A4 size paper
The document is loaded text side up.
The paper guide rests against the edge of the paper.
25 sheets of two-, three-, or four-
hole pre-punched media
The paper fits within these dimensions: Width: 8.27 – 8.5 inches (210.0 –
215.9 mm) Length: 11.0 – 14.0 inches (279.4 – 355.6 mm)
The document is loaded text side up.
The paper guide rests against the edge of the paper.
25 sheets of edge-reinforced
three-hole copier media
The paper fits within these dimensions: Width: 8.27 – 8.5 inches (210.0 –
215.9 mm) Length: 11.0 – 14.0 inches (279.4 – 355.6 mm)
The document is loaded text side up.
The paper guide rests against the edge of the paper.
25 sheets of preprinted forms and
letterhead media
The paper fits within these dimensions: Width: 8.27 – 8.5 inches (210.0 –
215.9 mm) Length: 11.0 – 14.0 inches (279.4 – 355.6 mm)
The document is loaded text side up.
The paper guide rests against the edge of the paper.
You allow the preprinted media to dry thoroughly before use in the ADF.
You do not use media printed with metallic ink particles in the ADF.
You avoid embossed designs.
25 sheets of custom size paper
The paper fits within these dimensions: Width: 8.27 – 8.5 inches (210.0 –
215.9 mm) Length: 11.0 – 14.0 inches (279.4 – 355.6 mm)
The document is loaded text side up.
The paper guide rests against the edge of the paper.
To Next Page
Loading...
Need help?
General
