PIN
Automatic
NOTE: The Wi-Fi Protected Setup menu is accessible only when the active connection is
Wireless.
Wireless Information View your wireless setup options.
Network Name
Wireless Signal Quality
TCP/IP Menu Configure TCP/IP setup options.
Enable DHCP
If DHCP is disabled, these items appear on the display:
Set IP Address
Set IP Netmask
Set IP Gateway
If DHCP is enabled, these items appear on the display:
View IP Address
View IP Netmask
View IP Gateway
Network Time Allow your printer to update its internal clock according to the time server of your
network.
*Enabled
Disabled
Active Network Specify which type of network to use.
*Auto
Ethernet 10/100
Wireless 802.11b/g
Reset Network Adapter
Defaults
Clears or retains all wireless network settings.
No
Yes
Wireless Information Menu
From this menu: You can:
Network Name View the current SSID being used.
NOTE: You cannot change the value of Network Name.
Wireless Signal Quality View the current wireless signal strength.
TCP/IP Menu
From this
menu:
You can:
Enable DHCP Enable DHCP on your printer.
*Yes
No
NOTE: You cannot change or set an IP Address, IP Netmask, or IP Gateway if DHCP is enabled.
Set IP Address
Use the keypad to enter an IP address. Press the Select button to save your settings.
NOTE: The IP address cannot be changed if DHCP is enabled. View IP Address appears on the display
instead.
Set IP Netmask
Use the keypad to enter an IP Netmask. Press the Select button
to save the settings.
To Next Page
Loading...
Need help?
General
