Printing a Booklet
Before you change any Print Properties settings, you must select the correct paper size from the program. You can print
booklets using these paper sizes:
Letter
A4
1. Load the paper. For more information, see
Loading Paper.
2. With your document open, click File® Print.
3. From the Print dialog box, click Properties, Preferences, Options, or Setup (depending on the program or
operating system).
4. Click the Advanced tab.
5. From the Layout drop-down menu, select Booklet.
NOTE: Booklet is not available if custom paper is selected.
6. From the Sheets per bundle drop-down menu, select a number of printed sheets per bundle.
NOTE: A bundle is a set number of sheets of paper folded together. The printed bundles are stacked, one on
top of the other, keeping the correct page order. The stacked bundles can be bound to make a booklet. When
printing with a heavier paper stock, select a smaller number of Sheets per bundle.
7. Click OK.
The Printing Preferences dialog box closes.
8. Click OK or Print.
Assembling a Booklet
1. Flip the printed stack of papers over in the paper exit tray.
2. Take the first bundle from the stack, fold it in half, and then set it aside with the front page down.
3. Take the next bundle from the stack, fold it in half, and then stack it with the front page down on top of the first
bundle.
4. Stack the rest of the bundles with the front page down, one on top of the other, until the booklet is complete.
5. Bind the bundles together to complete the booklet.
NOTE: For help binding and assembling the booklet, see Assembling a Booklet.
To Next Page
Loading...
Need help?
General
