/
SIRIUS
®
TECHNICAL REFERENCE MANUAL
5.13. STGM / STGM+
The STGM module is a universal amplifier perfectly fitting for strain gage and voltage
measurements.
5.13.1. STGMv3: Specifications
Voltage
Full / Half / Quarter bridge strain (120 Ω and 350 Ω)
24-bit delta-sigma dual core with anti-aliasing filter
Simultaneous 200 kS/sec
Dual Core Ranges (Low
range)
Offset accuracy (Dual
Core)
Offset accuracy after
Balance Amplifier
Typ. Dynamic Range @
10 kS (Dual Core)
Typ. Noise floor @ 10 kS
(Dual Core)
Typ. CMR @ DC…50 Hz /
400 Hz / 1 kHz
Typical 10 PPM/K, max. 40 PPM/K
Typical 0.3 μV/K + 5 ppm of range/K, max 2 μV/K + 10 ppm of range/K
Inter Channel
Phase-mismatch
0.02° * fin [kHz] + 0.1° (@ 200 kS/sec)
Max. Common Mode
Voltage
Isolated version: ±500 V
Differential version: ±12 V
In+ to In-: 50 V continuous; 200 V peak (10 msec)
Free programmable (16-bit DAC)
0, 1, 2.5, 5, 10 and 15 VDC
0 % to 100 % load <0.01 %
Line regulation over 20 Ω
of change
100 kΩ to Exc / >100 MΩ to GND
SIRIUS
®
V20-1 175 / 336