Digi Connect Series User Manual

Configurethedeviceusing theweb interface Serial portsconfiguration
Digi Connect Family and ConnectPort TSFamily
84
n
UDP Sockets: Allows the automatic distribution of serial data from one host to many devices
at the same time. The UDPSockets profile allows serial devicesto communicate using UDP.
TheUDPServer configuration allowsthe serial port to receive data from oneor more systems
or devices on the network. See Assign a profileto a serial port for more information.
TheUDPClient configuration allowstheautomatic distribution of serial data from one host to
many devices at the same time using UDPsockets.
Theport numbering conventionsshown in the TCPSockets Profile also apply to UDPsockets.
Not all port profiles are supported in all products. Supported port profilesvaries by Digi Connect and
ConnectPort TSFamily model. If a profilelisted in thisdescription isnot available on the page, it is
not supported in the Digi Connect and ConnectPort TSFamily product.
If you selected a port profile, theport number associated with the port profile appearsat the top of
the page. You can change or retain the profile and adjust individual settings.
Everything displayed on the Serial Ports Configuration page between Port Profile Settingsand the
linksto the Basic Serial Settings and Advanced Serial Settingsdepends on the selected port
profile.
Assign a profile to a serial port
To assign a profile to a serial port:
1. Select Configuration >Serial Ports.
2. Click a port number from thePort column.
3. Click Change Profile.
4. On the Select Port Profile page, select a port profile option and then click Apply.

Digi Connect Series Specifications

General

Brand	Digi
Model	Connect Series
Category	Network Router
Language	English