1-29
Chapter 1 Before Operation
4/7 page
[1]
[2]
[3]
[4]
[5] [6]
No. Item Details
[1] The number of manual feeds(*1) Specify the number of sheets feeding manually.
Setting range: 1 to 9, default: 1
[2] Stitch test key(*2) Used to check the stitching conditions. Pressing this key displays the
stitch test screen.
(p.3-6)
[3] Home reset key Pressing the key for more than one second moves the guides to the
home position.
[4] Page number Displays the current page number.
[5] Previous page key Returns to the previous page.
[6] Next page key Goes to the next page.
(*1) This item is deactivated when the PC CONTROLLER is connected to the system.
(*2) This is active when the stitching method has been set to “saddle stitching.”
5/7 page
[1]
[3] [4] [5]
[2]
No. Item Details
[1] Wire feed detection Set the wire feed detection for each stitcher to on or o.
B1 = non-operator’s side, B2 = non-operator’s side (*), F1 = operator’s
side, F2 =operator’s side (*)
Default: on (F1, B1), o (F2, B2)
(*)B2 and F2 are displayed when the 4 STITCH KIT (option) is attached.
To Next Page
Loading...
Need help?
General
