1-34
Chapter 1 Before Operation
4-7-3. Fore-edge trimming setting screen
[1]
[3]
[2]
No. Item Details
[1] Conveyance stop timing Specify the conveyance belt stop timing.
+: The value increases and it stop with slower timing.
-: The value decreases and it stops with faster timing.
Setting range: -20 to 10, default: 0
[2] Conveyance start timing Specify the timing for the trimmer to resume conveyance.
+: The value increases and it starts to move with slower timing.
-: The value decreases and it starts to move with faster timing.
Setting range: 0 to 5, default: 0
[3] Return key Returns to the [Options] screen.
4-7-4. Head/foot trimming setting screen (first page)
[1]
[2]
[3]
[4] [5]
No. Item Details
[1] Knife start timing Specify the knife start timing.
+: The value increases and it starts to move with faster timing.
-: The value decreases and it starts to move with slower timing.
Setting range: -15 to 15, default: 0
To Next Page
Loading...
Need help?
General
