Ecolab EcoAdd Series User Manual

Metering mode standard medium low variable
Display
Metering output
100 %
(V)
Typ:
00510x 5 l/h 4.17 l/h 3.33 l/h 2.5 - 5 l/h
01110S 11.0 l/h 9.17 l/h 7.33 l/h 5.5 - 11,0 l/h
03003S 30 l/h 25 l/h 20 l/h 15 - 30 l/h
05010M 50 l/h 41.7 l/h 33.3 l/h 25 - 50 l/h
12003M 120 l/h 100 l/h 80 l/h 60 - 120 l/h
Max. stroke frequency
at 100%
(¦)
Typ:
00510x 155 / min 141 / min 111 / min 104 - 155 / min
01110S 176 / min 160 / min 126 / min 117 - 176 / min
03003S 155 / min 141 / min 111 / min 104 - 155 / min
05010M 159 / min 145 / min 114 / min 107 - 159 / min
12003M 148 / min 135 / min 106 / min 99 - 148 / min
Stroke volume
(V
h
)
Typ:
00510x 0.53 ml
01110S 1.1 ml
03003S 3.4 ml
05010M 5.8 ml
12003M 13.5 ml
Suction stroke
duration
(S
t
)
Typ:
00510x 190 ms 228 ms 342 ms 380 - 190 ms
01110S 170 ms 204 ms 306 ms 340 - 170 ms
03003S 190 ms 228 ms 342 ms 380 - 190 ms
05010M 185 ms 222 ms 333 ms 370 - 185 ms
12003M 200 ms 240 ms 360 ms 400 - 200 ms
Min. metering stroke
duration
(P
t
)
Typ:
00510x 197 ms
01110S 171 ms
03003S 197 ms
05010M 192 ms
12003M 205 ms
The stroke frequency varies depending on the mode and calibration.
The diaphragm metering pump must be re-calibrated when switching
between individual metering modes!
The calibration symbol C! appears in the operating level display
.
Once the automatic [calibration] has been correctly carried out, the symbol
C! is hidden in the operating level again!
The table values displayed for the max. stroke frequency (max. metering
capacity) are dependent on the pump size and calibration.
The details about the suction stroke and metering stroke times are
theoretical values. They may vary according to calibration tolerances,
suction line lengths, back-pressure, etc.
Control / Software
75 417102276 Rev. 5-02.2020

Ecolab EcoAdd Series Specifications

General

Brand	Ecolab
Model	EcoAdd Series
Category	Water Pump
Language	English