Ecolab EcoAdd Series User Manual

7.9.5.2 [Operating mode] [T
imer] [Set Interval programme] .
2
3
4
5
6
7
8
10
11
12
13
14
16
17
18
9
15
19
Fig. 43: Operating mode: [Timer] [Interval programme]
1.
[Call up the Main menu] :
Ä Chapter 7.7 ‘Main menu’ on page 73
2. [T
imer] [Select Interval programme] .
3.
[Click Next]
to save the setting.
ð
Screen change to the selection of the timer interval (interval programme)
4. [Select Interval programme] .
ð
Screen change for the setting: ‘Interval programme
’ - ‘Switch-on duration’
5. Use the scrollbar to set the time / hours.
6. Select time / minutes.
7. Use the scrollbar to set the time / minutes.
8.
Press the button Next.
ð
Screen change for the setting: ‘Switch-off duration
’
9. Use the scrollbar to set the minutes.
10. Select seconds.
11. Use the scrollbar to set the seconds.
12.
Press the button Next.
ð
Screen change for the setting: ‘Start state’
13. If required, ‘Select OFF’ .
14.
Press the button Next.
ð
Screen change for the setting: ‘Capacity
’
15. Set the litres with the scrollbar
.
16. Select the ml range.
17. Set ml using the scrollbar
.
18.
Press the button to save the settings and return to the selection: ‘Operating
mode’.
19.
By pressing the button, you can return to the ‘
main menu’.
20.
By pressing the button, you can return to the [operating display].
Control / Software
91 417102276 Rev. 5-02.2020

Ecolab EcoAdd Series Specifications

General

Brand	Ecolab
Model	EcoAdd Series
Category	Water Pump
Language	English