10.2 Error table for error messages
10.2.1
Error code series 100
If an error message is triggered, the display on the pump shows an ALARM
together with the error code and a cause. The background of the display is
shown in red and the error message must be acknowledged at the top
right.
NOTICE!
With some error messages the pump should always be sent to the
customer service department as it is only possible to access the level of the
control to which these messages relate. The
Ä
‘Information about sending
pumps to Customer Service.’ on page 149 should be observed!
Fault description Cause Remedy
Error 100 Error opening file on internal file system. Send pump to Customer Service.
Error 101 Error setting file pointer on internal file
system.
Send pump to Customer Service.
Error 102 Error reading file on internal file system. Send pump to Customer Service.
Error 103 Error writing file on internal file system. Send pump to Customer Service.
Error 104 Error switching directory on internal file
system.
Send pump to Customer Service.
Error 105 Error creating directory on internal file
system.
Send pump to Customer Service.
Error 106 Error querying file size on internal file
system.
Send pump to Customer Service.
Error 107 Error closing file on internal file system. Send pump to Customer Service.
Error 108 Error finding file on internal file system. Send pump to Customer Service.
Error 109 Error deleting file on internal file system. Send pump to Customer Service.
Error 110 Error renaming file on internal file system. Send pump to Customer Service.
Error 199 Error initialising internal file system. Send pump to Customer Service.
Operational malfunctions / troubleshooting
151 417102276 Rev. 5-02.2020
To Next Page
Loading...
Need help?
General
