Vital Signs Monitor User Manual Networking
- 47 -
creation according to the normal operation
7.10 Uploading Data to Network Server
Ward round records and spot-checking data can be uploaded to network server.
Upload manually: Click Menu > Review > Upload or click review shortcut key directly, user
can choose as needed and upload the Ward round records/spot-checking data. The upload result
will be prompted by pop-up window, and in review window, a symbol will be displayed near the
data which have been uploaded successfully.
Upload automatically: in User Maintain > Network > Real-time Upload, if the setting is ON,
when monitor is in networking and is also connected with network server, the monitor will
upload the Ward round record which has been saved by user or the real-time spot-checking
measurement data to network server in real time. The upload result will be prompted in the
general information area of main interface, and in review window, a symbol will be displayed
near the data which have been uploaded successfully.
In User Maintain > Network, If Delete Data After Upload is set to On (default is Off), the data
successfully uploaded will be deleted in the device.
7.10.1 Continue to Upload from Breakpoint
When the monitor is in idle and there are data failed to be uploaded, the monitor can
automatically upload those data from the breakpoint if the network server is connected.
To Next Page
Loading...
Need help?
General
