To Next Page

To Previous Page

Using LFP Accounting

Tool

Basic Settings

You must perform the basic settings in advance for the

LFP Accounting Tool to obtain job information from

the printer for the calculation of costs and so on.

Perform setting in the following order. Follow the steps

described in the following section to perform the

setting.

1. Select the printer

2. Set the unit prices

3. Set the display conditions for job information

4. Set the units you want to summarize

Before doing the settings, check if the computer with the

LFP Accounting Tool is able to print from the printer.

For details of each setting screen, see the LFP

Accounting Tool help.

Select the printer

Select the printer for which you want to summarize cost

calculations and job information.

This section explains how to select the printer straight

after installing the LFP Accounting Tool.

Double-click the LFP Accounting Tool shortcut

icon on the desktop.

When the following message is displayed, click

OK.

When the following message is displayed, check

the content, decide what action to take, and then

click OK.

Select the printer from the Add Printer screen,

and then click OK.

If this software cannot communicate with the

printer, it is not displayed in the list. When you

want to summarize cost calculations and job

information for multiple printers, select the

target printers. We recommend setting up to four

printers for monitoring.

SC-F10000 Series User's Guide

Introduction

Epson SC-F10000 Series User Manual

Other manuals for Epson SC-F10000 Series