Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of
nongenuine ink. The use of non-genuine ink may cause damage that is not covered by Epson's warranties, and
under certain circumstances, may cause erratic printer behavior.
Information about non-genuine ink levels may not be displayed, and use of non-genuine ink is recorded for
possible use in service support.
Others
Product Part number Explanation
Cleaning cartridge T6960 Used for Head Washing and Pre-Storage Maint..
Cleaning cartridge
(Australia and New Zealand)
T8330
Maintenance Parts Kit
(except for SC-S40680/SC-S60680)
C13S210044 The following consumable items are included in one
maintenance set.
❏ Wiper unit (x1)
❏ Flushing pad (x1)
❏ Air filters (x2)
❏ Gloves (x2)
Maintenance Parts Kit
(for SC-S40680/SC-S60680)
C13S210045
Ink Cleaner T6993 Identical to the ink cleaner supplied with the printer.
U “Maintenance” on page 55
Waste Ink Bottle T7240 Identical to the Waste Ink Bottle supplied with the printer.
Cleaning Stick C13S090013 Identical to the Maintenance Kit items supplied with the
printer.
Clean Room Wiper
*1
C13S090016
Media Edge Plate
(except for SC-S40680/SC-S60680)
C12C932411 Identical to the media edge plate supplied with the
printer. Sold on a 1-plate basis.
Media Edge Plate
(for SC-S40680/SC-S60680)
C12C932421
Additional Print Drying System
(except for SC-S40680/SC-S60680)
C12C932381 Uses a fan to blow air over the media and assist drying.
Supplied with SC-S60600 Series printers.
U “Changing the Heater Temperature and Drying
Settings” on page 50
Additional Print Drying System
(for SC-S40680/SC-S60680)
C12C932391
*1 Not available for purchase in some countries and regions. We recommend BEMCOT M-3II by Asahi Kasei
Corporation when purchasing commercial products.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Appendix
116
To Next Page
Loading...
Need help?
General