Epson SC-S60600 Series User Manual

c
Important:
When wiping, make sure the cloth or your
finger does not touch the rod B shown in the
illustration.
If the cloth or your finger touch the rod, an
error could occur during printing.
Applying Grease to the
Carriage Rod
When Apply secondary carriage rod grease. See
manual. is displayed on the control panel screen,
follow the steps below to apply grease to the carriage
rod as soon as possible.
Location of Carriage Rod and
Used Pad
There are two carriage rods, rod A and rod B. Apply
grease to both rods using the grease kit supplied with
the printer.
The grease application tool varies depending on the
rod as shown below.
Carriage rod A
A
Carriage rod B
B
Before starting this procedure, be sure to read the
following:
U “Precautions regarding maintenance” on page 59
Greasing procedure for carriage
rod A
Buttons that are used in the following settings
A
After confirming that the printer is ready, press
the # button.
The Maintenance menu will be displayed.
B
Use the u button to select Other maintenance,
and then press the Z button.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Maintenance
83

Epson SC-S60600 Series Specifications

General

Brand	Epson
Model	SC-S60600 Series
Category	Printer
Language	English