Epson SC-S60600 Series User Manual

Printable area
The gray area in the illustration below shows the printable area. The arrow indicates the feed direction.
The left and right edges of media recognized by the printer varies as shown below according to the Media
Size Check settings.
Media Size Check ON : The printer automatically detects the left and right edges of the loaded media.
When media edge plates are attached, within 5 mm of the left and right edges of the
media is recognized as the media edge.
The edges of the media are not detected correctly if the media edge plates are not
attached correctly.
U “Loading media” on page 26
Media Size Check OFF : The longest scale on the after heater's label (in the illustration below) is used as the
standard position for the right edge of the media. Regardless of the width of the loaded
media, the left edge of the media is determined to be 1,626 mm (64 inches) from the
standard position for the right edge.
*When Media Size Check is set to OFF, this is 1,626 mm (64 inches) regardless of the width of the loaded media.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Basic Operations
53

Epson SC-S60600 Series Specifications

General

Brand	Epson
Model	SC-S60600 Series
Category	Printer
Language	English