A
Confirm that the printer is on and press the #
button.
The Maintenance menu will be displayed.
B
Use the d/u buttons to select Head
Maintenance and press the Z button.
C
Use the d/u buttons to select Regular
Cleaning, and then press the Z button.
The print head moves to the cleaning position.
Note:
The buzzer sounds 10 minutes after the print head is
moved (default setting). Press the Z button to
continue the cleaning process. After 10 more minutes
have passed, the buzzer sounds again.
Cleaning Around the Print Head
If you notice any ink clots, lint, or dust when checking
the area around the print head, clean the area by
following the steps below.
The SC-S80600 Series/SC-S60600 Series has two print
heads. Clean around both print heads.
Before starting this procedure, be sure to read the
following:
U “Precautions regarding maintenance” on page 59
A
After the print head moves to the left end of the
printer, open the left maintenance cover.
B
Dampen the cleaning stick with ink cleaner.
Use new cleaning stick and ink cleaner.
U “Using ink cleaner” on page 61
c
Important:
❏ Rinse a cleaning stick using ink cleaner
for each step.
❏ After removing a clot of ink with a
cleaning stick, wipe off using a
clean-room wiper.
C
Wipe off any adhered ink, lint, and dust from
the parts that are indicated by the arrows below.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Maintenance
62
To Next Page
Loading...
Need help?
General