Epson SC-S60600 Series User Manual

Take-up with the Printed Side
Facing Out
A
Cut the paper tape approximately 70 cm in
length, and paste it approximately in the center
of the media using commercially available
adhesive tape.
B
While pulling the paper tape straight down,
wrap it around the roll core from front to back,
and affix it using commercially available
adhesive tape.
c
Important:
Attach the media to the take up roll core
with the media in a taut state. If media is
attached in a loose state, the media may
move around during take-up.
C
Flip the Auto switch to .
D
Lower the tension bar until it slightly touches
the paper tape.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Basic Operations
35

Epson SC-S60600 Series Specifications

General

Brand	Epson
Model	SC-S60600 Series
Category	Printer
Language	English