D
Wipe off any adhered ink, lint, and dust from
the parts that are indicated by
below.
Right print head only in SC-S40600 Series.
E
Wipe off any adhered ink, lint, and dust from
the parts that are indicated by
below.
F
Close the left maintenance cover.
Cleaning Around the Caps
Before starting this procedure, be sure to read the
following:
U “Precautions regarding maintenance” on page 59
Cleaning Caps
A
Open the right maintenance cover.
B
Dampen the cleaning stick with ink cleaner.
U “Using ink cleaner” on page 61
C
Hold the cleaning stick flat and wipe the edges
of all the caps.
The SC-S80600 Series/SC-S60600 Series has
two blocks for the caps. Clean all of the caps.
c
Important:
Do not push strongly against the edges or the
surrounding area of the cap, or touch the
inner side of the cap with a cleaning stick or
tweezers. The part maybe deformed, and it
may no longer be possible to perform capping
correctly.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Maintenance
63
To Next Page
Loading...
Need help?
General