Epson SC-S60600 Series User Manual

E
Check that three hooked sections at the rear of
the media edge plate are securely applied as
shown below and that they are attached with no
gap between the platen and media edge plate.
Hook into the tip: Corners of the platen
Hook into the rear of square hole: Groove in
front of white line
Hook into the rear of tab: Front corner of the
platen
c
Important:
If hooked sections are not positioned
correctly, return to Step 3 to attach them
again. Otherwise, the head may be damaged.
F
While holding the tabs of each media edge
plate on both sides, move both the plates to the
left and right edges of the platen respectively.
Releasing the tab fixes the media edge plate.
G
Close the left maintenance cover and front cover.
Disposal of used
consumables
Disposal
The following used parts with adhered ink are
classified as industrial waste.
❏ Cleaning stick
❏ Clean-room wiper
❏ ink cleaner
❏ Waste ink
❏ Waste Ink Bottle
❏ Wiper unit
❏ Flushing pad
❏ Air filter
❏ Media after printing
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Maintenance
75

Epson SC-S60600 Series Specifications

General

Brand	Epson
Model	SC-S60600 Series
Category	Printer
Language	English