Epson SC-S60600 Series User Manual

Inside
Dirt on any of the following parts may reduce print quality. Regularly clean or exchange these parts as described in
the chapters listed in the reference sections below.
A Print head
The print head prints by moving left and right while emitting ink. Clean at least once a month.
U “Cleaning Around the Print Head” on page 62
B Media edge plates
The media edge plates prevent the media riding up and keeps fibers on the cut edge of the media from
touching the print head. Position the plates at either side of the media before printing.
U “Loading media” on page 26
C Cutter groove
Pass the blade of a cutter (available in the market) down this groove to cut media.
U “Cutting Media” on page 42
D Pressure rollers
These rollers press down on the media during printing.
U “Daily Cleaning” on page 59
E Platen heater
The platen heater ensures that the ink adheres evenly.
U “Changing the Heater Temperature and Drying Settings” on page 50
U “Daily Cleaning” on page 59
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Introduction
9

Epson SC-S60600 Series Specifications

General

Brand	Epson
Model	SC-S60600 Series
Category	Printer
Language	English